Modify Selection
- Mining types and methods:
- Underground mining
- or
- Auger mining
- or
- Leaching
- or
- Cut and fill stoping
- or
- Caving
- or
- Block caving
- or
- Hydraulic mining
- or
- Drift mining
- or
- Longwall mining
- or
- Multiple seam mining
- or
- Overmining
- or
- Undermining
- or
- Water jet mining
- or
- Low seam mining
- or
- Hydraulic backfill
- or
- Room and pillar mining
- or
- Retreat mining
- or
- Extended cut mining
- or
- Continuous mining
Home Links
Results 31 - 40 of 403
-
10/1/2009 - Peer reviewed journal articlesInstruments remaining in a test section of a lead/zinc/copper room and pillar mine where pillar mining had taken place 14 years before were read to monitor long-term stability and quantify time dependent behavior in the mine roof and backfill.
-
9/1/2009 - Peer reviewed journal articlesThis paper summarizes the results of a study conducted to evaluate the effects that several types of DPFs, DFEs, and a DOC have on the concentration and size distribution of diesel aerosols in an underground mine.
-
9/1/2009 - Peer reviewed journal articlesIn this paper, the total gas flow rates and methane percentages from 10 GGVs were analyzed. The results showed that the two-hidden layer model predicted total production and the methane content of the GGVs with more than 90% accuracy.
-
NIOSH has created this document with suggestions for developing manuals and educational materials concerning refuge chambers for miners.
-
7/1/2009 - Peer reviewed journal articlesThis paper discusses a study in which a three-dimensional CFD modeling of spontaneous heating of coal, based on the U.S. Bureau of Mines (USBM) large-scale coal chamber tests, was conducted.
-
7/1/2009 - Conference papersThis paper presents a description of geologic settings, mining conditions, rockmass characterization with geotechnical risk assessment, analysis, mapping, and control techniques used at an underground stone mine in Central Pennsylvania.
-
5/1/2009 - Technology NewsResearchers with NIOSH have developed a training module to educate both new, inexperienced miners as well as veterans on important issues related to self-rescue and escape procedures.
-
This video-based training module can be used to educate both inexperienced and veteran miners on important issues related to self-rescue and escape procedures.
-
3/1/2009 - Peer reviewed journal articlesThis study describes the development of an expert classification system used as a decision tool which can be used for degasification system selection using site- and mine-specific conditions.
-
2/1/2009 - Conference papersThis paper describes the effort to create a reliable in-mine mobile plant for extracting nitrogen gas from the mine atmosphere. The gas produced by this novel technology can be used to create an inert environment in sealed mine areas.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program